Product Description
waterproof caped dual USB charging socket and SPST switch with or without illumination. Your choice of color switch. Comes wired ready to hook up 12 volts.
Use for iPhones, iPods, GPS, cell phones of all types...
The dual USB charger is rated for 2.1 amps at 5 volts attaches to your 12 volt source. The switch can be used to turn on and off the charger so it will not draw any power when not in use. The SPST switch can also be used to control other accessories and is rated for 16 amps at 12 volts. The switch is available in your choice of colors and can be used with illumination or without. The illumination is low intensity so it will help with night vision. Both the switch and the charger are repairable with front access.
USB Charger:
The USB dual charger socket with weatherproof cap. This cap unlike others cover the complete USB opening to prevent moisture intrusion. Attaches to your 12 volt source and allows you to charge USB accessories. The charger body is a heavy nylon with all nickel plated parts. The weatherproof cap snaps over the front of the charger to keep moisture out when not in use. The socket has 0.250 male spade type terminals for easy wire connections.
Switch:
Splash proof front and back. LED Illuminated or non illuminated waterproof Rocker Switch -SPST. Nylon threaded switch housing mount in a 1-1/8" hole. Can be
mounted in panels or dashboards up to 1-1/4" thick with the retaining nut and in panels of unlimited thickness with the mounting plate. Rated for 16 amps at 12 volts. Has
male ¼" crimp style disconnect terminals. Illumination is low intensity for easier night vision.
-Three wire connection:
Black wire goes to negative 12 volt power source.
Yellow wire goes to one side of the load being switched.
Red wire goes the positive side of the load being switched.
Mount:
The charger and switch fit in a 1-1/8" holes in panels of unlimited thickness by placing the rectangular double compression plate over the front of the two devices and securing it with four screws. The two holes are side by side on 1-3/4" centers. The plate dimensions are 4.0" x 1.75" The mounting screw hole pattern is on I" centers for the two holes on the short side, and on 3-3/8" centers for the two holes on the long side.
Contact person: Arthur Tsui
Tel:+ 86 0769 8800 2382
Call me in English Korean or Chinese
Audited Supplier 
){kind=link}